{"id":8051,"date":"2025-01-19T15:31:45","date_gmt":"2025-01-19T15:31:45","guid":{"rendered":"https:\/\/www.inthacity.com\/blog\/uncategorized\/secure-work-best-clamping-tools-dewalt-irwin\/"},"modified":"2025-01-19T15:44:21","modified_gmt":"2025-01-19T15:44:21","slug":"secure-work-best-clamping-tools-dewalt-irwin","status":"publish","type":"post","link":"https:\/\/www.inthacity.com\/blog\/life\/crafts\/woodworking\/secure-work-best-clamping-tools-dewalt-irwin\/","title":{"rendered":"Secure Your Work Effortlessly with the Best Clamping Tools \u2013 Never Worry About Clamping Again!"},"content":{"rendered":"

Every workshop needs a reliable way to hold things. You want a vice that\u2019s fast and easy to clamp and unclamp, something that holds securely and works in all sorts of situations. Well, what if I told you that the perfect solution has been around for over 400 years? Yes, you read that right. This isn\u2019t just any vice\u2014it\u2019s a design straight out of the 1600s, described by Joseph Moxon in his book The Art of Joinery<\/em>. And today, we\u2019re going to show you how to build this timeless tool using simple construction lumber and a bit of hardware.<\/p>\n

This article is inspired by James Hamilton from Stumpy Nubs<\/a>, who breaks down this fascinating project in one of his videos. Whether you\u2019re a seasoned woodworker or a weekend DIYer, this vice is a game-changer. Let\u2019s dive in!<\/p>\n

Why This Vice Is a Must-Have for Your Workshop<\/h2>\n

So, what makes this Moxon-style vice so special? For starters, it\u2019s incredibly versatile. You can fasten it to the front edge of your bench for a permanent setup, or use it as a portable vice that clamps onto any surface when needed. And here\u2019s the kicker: it raises your workpiece, making it easier on your back and eyes. Who doesn\u2019t want that?<\/p>\n

But the real magic lies in its design. Unlike modern vices with screws or guides in the center, the Moxon twin-screw design allows a workpiece to pass through the jaws and extend toward the floor. This is a godsend for tasks like making boxes, cabinets, and drawers. It\u2019s a design that has stood the test of time\u2014because it just works.<\/p>\n

What Makes This Build Different?<\/h3>\n

There are plenty of Moxon vice videos out there, but this one stands out. Why? Because it solves some key problems. Normally, the threaded rods are fixed to the back jaw and stick out past the front jaw, getting in the way when the vice is closed. The solution? Attach the handles permanently to the rods and screw them into the back jaw. But that creates another issue: aligning the embedded nuts in the back jaw for smooth operation.<\/p>\n

This build solves that problem with a clever design involving square nuts and homemade flanges that allow everything to self-align. It\u2019s simple, inexpensive, and downright brilliant. You\u2019ll wonder why you didn\u2019t build one sooner.<\/p>\n

Step-by-Step Guide to Building Your Moxon Vice<\/h2>\n

Ready to get started? Here\u2019s what you\u2019ll need:<\/p>\n